Texo Application has created robots that they call for satellites; with these you can feed in storage pallets into a satellite storage. Satellite storages consist of channels in height (e.g.3 to 8 pieces) and width (e.g.3 to 100 pieces). Channels can be different long (e.g. 5 to 200 pallets). At deposit of a storage pallet the truck insert the satellite in a channel and then the pallet, the pallet is driven into the channel until it reaches another pallet or the other end.

This thesis was conducted at AB Fredr Wagner in Ösmo in Nynäshamn, Sweden.AB Fredr Wagner provides solutions for the graphic industry and has been asked by acustomer to develop a product that can simplify handling of EUR-pallets, namely amechanical arrangement, further called pallet exchanger that can switch from anempty pallet to a fully loaded one using only hand force.The goal with the thesis was to create design documents for a pallet exchanger, andalso from those documents to manufacture a prototype for testing and evaluation.A field trip was made to the customer, IKAB mailing in Huddinge, where the palletexchanger is thought to be placed. The purpose of this field trip was to get an insightinto the current work condition and need of change, as well as to gather informationregarding the requirements when it comes to size and robustness of the palletexchanger. Existing equipment on the market that can perform similar tasks werestudied in order to find an optimal solution for the actual pallet exchanger.After the field trip and gathering of information the concept generating phase began.The method used for generating concepts was brainstorming. To decide on whichconcept to use, a concept selection matrix was created. The selection criteriaincluded in the matrix came from the requirements for the pallet exchanger.

Det senaste decenniet har Sydafrika genomgått enorma förändringar. Landet har lämnat det minoritetsstyrda apartheidsystemet och blivit demokratiskt. Att förändringar får olika följder är givetvis självklart, kanske relaterar de flesta till den kraftiga ökningen av våldsbrott. Det finns dock även en annan typ av brott som ofta kommit i skymundan i den nuvarande debatten det är s.k. White-Collar Crime, vilket jag har valt att undersöka i min uppsats.

Simplicity, intimacy, freedom and one single threadcharacterize the knitting technique.In my project, I have studied ways of creating three-dimensional shape and structure using single threads and various knitting techniques. I applied my ideas in a collaboration with the singer Sofia Karlsson. The focus has been to design a portable object that can be used in pictures for the cover and promotion of her upcoming album.The material I studied, processed and used in creating the three-part object was linen. In the center stands a collar, that changes expression depending on how it is worn and which side is turned towards the outside. The collar interacts with a cylinder for her hands and a hairnet.

The purpose of my task was to map the pallet flows at Findus and put together as well as analyze the problems. My work has also included finding out what alternatives there are to the present pallet exchange system and suggest measures to reduce the problems.The problems can be divided into poor quality and hygiene issues. The poor quality, for instance poor strength is due to arbitrary judgements and the fact that there are companies that make a system of manufacturing forged pallets of an inferior quality compared to the EUR-pallets. These pallets are marked with stamps more or less similar to the EUR-mark and taken into the exchange system. Of course there are rules how to judge a pallet but these rules are many and sometimes indistinct and there are a lot of marks to keep track of.The most dangerous part is when the pallets lack the prescribed carrying capacity.

Work gets more seamless and the demand on workers increases because of changes in the labour market. Studies show benefits for workers and companies if the employee achieves a balance between work and family, a way to facilitate it is family-friendly policies. A study done by Unionen shows that three out of four white collar workers choose to vobba (working and caring for a sick child), which blurs the boundaries between work and family. Research on flexibility, organisational culture and gender structures shows how these aspects affect the balance between work and family. This is a study where seven white collar workers (three men) that vobbar and two managers (one man) were interviewed.

This report analyzes disposable packaging and returnable packaging with the methods life cycle analysis and life cycle costs analysis. These two different packaging are analyzed through the company Clas Ohlson?s packaging-flow. To get a picture of how the flow works, a visit at the company and email contact have been done with Clas Ohlson to get relevant informationToday Clas Ohlson has a big flow of articles to the stores without larger variations in the demand, with the exception of autumn, which is when customers start shopping for Christmas. Clas Ohlson?s articles are placed on a pallet and are wrapped into plastic-film for protection and to make sure that nothing will be stolen.

Ett arbete inom produktutveckling har utförts på uppdrag av Goodtech Solution AB i Karlstad. Den produkt som utvecklats är en prototyp av en robotcell. Robotcellens uppgift beskrivs som automatisk pallkragsmontering på en lina. Den här rapporten omfattar förbättringsarbetet för Ytterkragen och dess drift för vertikal rörelse och höjdpositionering. Syftet är att rapporten för detta arbete ska ligga som grund för prototypens förbättringsarbeten innan den släpps ut påmarknaden.Monteringen sker på en lina med rullband där emballaget monteras ihop i robotcellen innan det skickas vidare för nästa moment.

Titel: Gör cheferna som de säger? Kunskapens betydelse för skillnader i uttalad och faktisk interaktion mellan chefer och blue-collar workers respektive knowledge workers.Nivå: Examensarbete i Företagsekonomi, Kandidatnivå, 15 hpFörfattare: Madeleine Lindqvist och Björn StenholmHandledare: Per-Arne WikströmDatum: Juni 2013Syfte: Syftet är att undersöka kunskapens betydelse för skillnader i uttalad och faktisk interaktion mellan chefer och blue-collar workers respektive knowledge workers. Metod: Studien har genomförts med en kvalitativ metod. Semi-strukturerade intervjuer med anställda och chefer på olika företag har använts för att samla in det empiriska materialet. Den teoretiska referensramen har samlats in genom relevant kurslitteratur och vetenskapliga artiklar inom ämnet. Resultat & Slutsats: Slutsatsen som dragits utifrån denna studie är att det inte gått att finna något glapp mellan chefers uttalade och faktiska handlingar. Däremot visar den på att svårigheten med kommunikation kvarstår trots kunskap om interaktion Förslag till fortsatt forskning: Då vi anser att vårt tillvägagångssätt inte kunde stödja den klassiska teorin föreslår vi att samma forskningsfråga studeras med en deltagande metod då vi tror att det skulle ge ett annat resultat. Ett annat förslag är att undersöka varför kommunikationen mellan chefer och anställda inte fungerar trots att båda parter är medvetna om problemet. Uppsatsens bidrag: Studien bidrar till en ökad förståelse för de komplexa situationer som chefer med ledaransvar ställs inför och huruvida deras kunskap inom områden som kommunikation och interaktion kan hjälpa dem i sitt arbete. Nyckelord: Espoused theory, theory-in-use, arbetsmotivation, knowledge workers, blue-collar workers.

Många faktorer påverkar självkänslan, såsom uppskattning och beröm. Finns det skillnad mellan arbetare och tjänstemän hur den egna självkänslan upplevs på arbetet? M. Rosenbergs (1965) self-esteem scale användes som globalt begrepp för att undersöka skillnader i självkänsla. Nittiofyra arbetare och tjänstemän deltog i enkätstudien.

AbstractThis master thesis was performed at Scania transmission department in Södertälje, where the manufacturing of gears is done. Today a large amount of manual handling is performed between the machining and the hardening process. Most of the manual handling is done at the heat treatment department. The purpose of this master thesis is to give a suggestion on how to reduce or eliminate the manual handling at the heat treatment department. The possibility to use the same packaging throughout the processes will also be investigated.

AbstractThis master thesis was performed at Scania transmission department in Södertälje, where the manufacturing of gears is done. Today a large amount of manual handling is performed between the machining and the hardening process. Most of the manual handling is done at the heat treatment department. The purpose of this master thesis is to give a suggestion on how to reduce or eliminate the manual handling at the heat treatment department. The possibility to use the same packaging throughout the processes will also be investigated.

AbstractThis master thesis was performed at Scania transmission department in Södertälje, where the manufacturing of gears is done. Today a large amount of manual handling is performed between the machining and the hardening process. Most of the manual handling is done at the heat treatment department. The purpose of this master thesis is to give a suggestion on how to reduce or eliminate the manual handling at the heat treatment department. The possibility to use the same packaging throughout the processes will also be investigated.

This master thesis concerns the occupational safetyenvironment at Outokompu Stainless, Avesta Work.The study is of a sociotechnical approach wherehumans are involved and interconnected in the samesystem with technology and organisation. In order toreach the corporation?s goal of zero accidents with losttime injury, the work of improving and maintainoccupational safety and health has to regard behaviourand cultural aspects. The aim of this study is todescribe the safety culture at a specific production unitand research what work which has to be done in orderto change and improve the safety culture at AvestaWork.There are several opportunities for improvementpointed out in this paper and here are some mainresults presented. First and foremost, the concern ofsafety among blue-collar is often secondary due toproduction.

AbstractThis master thesis was performed at Scania transmission department in Södertälje, where the manufacturing of gears is done. Today a large amount of manual handling is performed between the machining and the hardening process. Most of the manual handling is done at the heat treatment department. The purpose of this master thesis is to give a suggestion on how to reduce or eliminate the manual handling at the heat treatment department. The possibility to use the same packaging throughout the processes will also be investigated.